Panasonic AJSPX800P AJSPX800 User Guide - Page 64
When using a BP-90 type battery pack., <Notes>, <Note>
![]() |
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
When using a BP-90 type battery pack. 1 Remove the battery holder. 3 Connect the battery pack plug to the socket inside the battery case, and insert the battery pack into the case. Battery holder Label surface 2 Attaching the battery case to the camera-recorder. Connect the cable on the camera-recorder to the cable on the battery case (BP-90 type). Using a screwdriver, secure the battery case (BP-90 type) to the camera-recorder. Open the cover and lift the rubber cap so that the screw tightening hole is visible. Tighten the screws to secure the battery case to the camera-recorder. Be sure to fully tighten the screws. z Do not use excess force when lifting the rubber caps forcibly. z Take special care not to pinch the cable. Make sure you turn OFF the camera-recorder power before connecting or disconnecting the plug. 4 Setting the battery type. Select the battery type listed under BATTERY SELECT. Select BATTERY SELECT from the screen on the MAIN OPERATION page. Please refer to [8-6-2 BATTERY SETTING1] for more information. Connect Battery Case (For BP-90 type) 64
![](/manual_guide/products/panasonic-ajspx800-ajspx800-user-guide-9e7c54e/64.png)