Panasonic AJSPX800P AJSPX800 User Guide - Page 97

8-3-8 SKIN TONE DTL 8-3-9 KNEE/LEVEL Items/ Adjustable Data Saved Range Remarks Items/ Adjustable Data Saved Range Remarks „SKIN TONE ON Set the skin tone DTL to ON or OFF. MASTER PED -200 Set the master pedestal. DTL OFF SCU F E „SKIN TONE ON ON/OFF switching for ZEBRA within the : +020 : S C U F E +200 ZEBRA OFF SKIN TONE range. „MANUAL ON Set the mode when the AUTO KNEE switch SCU F E SKIN DTL 0 Adjust the effect of SKIN TONE DTC KNEE OFF SCU F E is OFF. The KNEE POINT/SLOPE set value is enabled when this setting is ON. CORING : 5 : S C U F E7 SKIN TONE CORING. Used when obtaining the target hue for KNEE POINT 70.0% : 85.0% : S C U F E 107.0% Set the KNEE POINT position in 0.5% steps. GET SKIN TONE DTL. Align the center marker KNEE SLOPE 00 Set the KNEE SLOPE. ----- Y MAX 000 : 190 : S C U F E 255 Y MIN 000 : 010 : S C U F E 255 I CENTER 000 : 022 : S C U F E 255 I WIDTH 000 : 010 : S C U F E 255 Q WIDTH 000 : 005 : S C U F E 255 Q PHASE -128 and the target object with each other. Set the maximum value of the brightness signal to which SKIN TONE effect is enabled. : 50 : 99 (98) SCU F E 0 setting is equal to KNEE OFF. The adjustable range when using the AJEC3P is from 00 to 98. Set the minimum value of the brightness signal to which the SKIN TONE effect is enabled. Set the center position on the I axis (the area where SKIN TONE is enabled). „WHITE CLIP ON OFF SCU F E WHITE CLIP 90% LVL : 105% : S C U F E 109% Set the WHITE CLIP feature to ON or OFF. The WHITE CLIP LVL set value is enabled when this setting is ON. Set WHITE CLIP LEVEL. 8 Set the area width where SKIN TONE is enabled along the I axis above and below the I CENTER. A.KNEE POINT 80% : 85% : S C U F E 107% A.KNEE LVL 100 Set the AUTO KNEE POINT position in 0.5% steps. This setting is enabled when the OUTPUT/AUTO KNEE selector switch is set to CAM.AUTO KNEE ON. Set the AUTO KNEE LEVEL. Set the area width where SKIN TONE is enabled along the Q axis above and below the I CENTER. Set the phase in the area where SKIN TONE : 105 : S C U F E 109 A.KNEE 1 RESPONSE : 4 SCU F E Set the AUTO KNEE response speed. The smaller the setting value, the faster the response speed. : +000 : S C U F E +127 is enabled based on the Q axis. The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the screen. The items without „ are the setting items for PAINT MENU LEVEL R/W. R-Y Y Please refer to [8-7-2 SD CARD R/W SELECT] for more information. Q-WIDTH I-CENTER I-WIDTH + direction Y-MAX The ____ in the Adjustable Range column indicates the preset mode. - direction Q-PHASE B-Y = SKIN TONE AREA Y-MIN 0 97