Panasonic AJSPX800P AJSPX800 User Guide - Page 13
Shooting and Recording/Playback Functions
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2-4 Shooting and Recording/Playback Functions Section 2 / Shooting and Recording (camera unit) CC/ND FILTER (filter selector) control Used to select a filter appropriate for illumination and color temperature of the subject. When the menu option DISP MODE is set to "3", switching this control displays the selected filter number in the viewfinder. Examples of filter selection according to shooting conditions Setting of the CC/ND FILTER Description of filter Shooting conditions control 1 3200K Sunrise, sunset Studio 2 5600K + 1/8 Clear outdoor environments 3 5600K Cloudy/rainy outdoor environments 4 5600K + 1/64 Clear, bright scenes such as snowscape, high mountains, beaches, etc. USER MAIN, USER 1 and USER 2 buttons These buttons can be assigned user-selected functions, using a menu option. Each button, when pressed, performs the assigned function. For more information, see [4-9-4 Assigning Functions to USER MAIN, USER1 and USER2 Buttons. SHUTTER switch Used to enable or disable the electronic shutter. OFF: ON: SEL: Electronic shutter disabled. Electronic shutter enabled. Used to change the speed of the electronic shutter. This dial switch returns to its original position. Each turn of the switch alters the shutter speed. For more information, see [4-2 Setting the Electronic Shutter]. AUTO W/B (white/black) BAL switch AWB: White balance is automatically adjusted. When the WHITE BAL switch on the side is positioned at [A] or [B], the adjusted value is stored in the memory. However, if "VAR" is selected for the menu options AWB A and AWB B, the value set through the menu options is used, and this function does not work. Menu options can be found in the screen on the CAM OPERATION page. Note also that when the switch is positioned at PRST this function does not work. ABB: Back balance is automatically adjusted. To automatically correct black shading, the AUTO W/B BAL switch must be pressed toward [ABB] for longer than five seconds. To stop automatic adjustment of the white or black balance in progress, set the switch to either ([AWB] or [ABB]). If automatic adjustment is cancelled, the value in effect before automatic adjustment will be used. Gain selector switch Use this switch to select video amplifier gain, according to lighting conditions under which you are shooting. The values for L, M, and H can be preset using menu options. These are factory-set to 0 dB for L, 9 dB for M, and 18 dB for H. 13