Panasonic AJSPX800P AJSPX800 User Guide - Page 57

6 Turn the JOG dial button until a desired character appears. The characters that appear are switched in the following order: The data will not be written if any of the following messages appears when the JOG dial button is pressed: Space: † Error message Remedy Ð WRITE NG Insert an SD card. Alphabetical characters: Ð Numerals: Ð Symbols: A to Z 0 to 9 NO CARD (No SD card inserted.) WRITE NG FORMAT ERROR (SD card not properly formatted.) WRITE NG The card has not been formatted using the AJ-SPX800P. Replace the card. The card may be defective. 7 Press the JOG dial button to accept a desired character. 8 Turn the JOG dial button to move the cursor to the next digit ERROR (SD card not writable.) WRITE NG WRITE PROTECT Replace the card. Remove the card and disable the 4 protect. (clockwise), and repeat Steps 6 - 7 to set characters (up to (SD card write-protected.) eight characters). WRITE NG CANNOT ACCCESS Example: The SD card is not accessible because it is being To write data on a selected file: (SD card not accessible). played back. After the operation in process, format the card. 9 When the title is set, turn the JOG dial button to move the cursor to [:]. WRITENG CARD FULL (SD card has no free space.) The card is not writable because it has no free space. Delete unwanted files or replace the card with a new one. 6'&$5'5($':5,7(! 56(/(&7 5($' :6(/(&7 5,7( &$5'&21),* 7,7/(5 7,7 13 Turn the JOG dial button to move the cursor to YES. Then, press the dial button. When the data has been written, the following message appears: 10 Press the JOG dial button to return the cursor to the option [TITLE:]. 11 Turn the JOG dial button to move the cursor to the option [WRITE]. 12 Press the JOG dial button to display the following message: :5,7(2. 14 To exit the menu, press the MENU button. The settings menu disappears and the status of the AJSPX800P is indicated at the top and bottom of the viewfinder screen. :5,7("