Panasonic AJSPX800P AJSPX800 User Guide - Page 54
Assigning Functions to USER MAIN, USER1 and USER2 Buttons, Setting Color Temperature Manually
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4-9-4 Assigning Functions to USER MAIN, USER1 and USER2 Buttons The USER MAIN, USER1, and USER2 buttons can be assigned user-selected functions. To select desired functions, use the menu options USER MAIN SW, USER1 SW and USER2 SW. These options can be found in the screen, which is accessible from the CAM OPERATION page. 86(56:! 86(50$,16:6/276(/ 86(56:6*$,1 86(56:'6*$,1 Selectable Functions INH: S.GAIN: DS.GAIN: S.IRIS: I.OVR: S.BLK: B.STR: D.ZOOM: ATW: Y GET: No function assigned. S.GAIN function assigned. DS.GAIN function assigned. Super Iris function assigned. This is useful for backlight compensation. Iris Override function assigned. The target (reference) value in Auto Iris mode must be changed. To change the target value, put the AJ-SPX800P into this mode and press the JOG dial button. Turn the JOG dial button clockwise or anti-clockwise to change the value. The iris indication section of the viewfinder screen displays or "- -". When the desired value is displayed, stop turning the JOG dial button. Then, press the dial button to accept that value. Note that once the mode is cancelled or the power is turned off the original reference value will be used again. +: Iris opens up by 0.5. + +: Iris opens up by 1. -: Iris closes down by 0.5. - -: Iris closes down by 1. No indication: The reference value is used. Super Black function assigned. This function lowers the black level to the pedestal level or below. Black Stretch function assigned. This function emphasises the black shades. Doubles the view angle, both horizontally and vertically. When the camera is set to the 60i operation mode, this function forcibly switches the operation mode to 30P. Auto-tracking white balance function assigned. Function of indicating the brightness level of the center marker assigned. NEWS-G: Function of switching on and off News Gamma assigned. News Gamma is capable of reproducing shades without whiteout or blackout. This is useful for such operations as news shooting. To turn on/off News Gamma using the USER button which is assigned NEWS-G, the menu option GAMMA MODE SEL must be set to "STD". This option can be found in the screen, which is accessible from the PAINT page. AUDIO CH1: Function of switching the input signal source for Audio Channel 1 assigned. Pressing the button switches the input signal in the following order: FRONT W.L. REAR. Note that the AUDIO IN switch can also be used to change the input signal: later specification takes precedence. AUDIO CH2: Function of switching the input signal source for Audio Channel 2 assigned. Pressing the button switches the input signal in the following order: FRONT W.L. REAR. Note that the AUDIO IN switch can also be used to change the input signal: later specification takes precedence. REC SW: Function of the REC START/STOP button assigned. RET SW: Function of the RET button at the lens assigned. SLOT SEL: Function of switching the target P2 card among multiple cards assigned. 4-9-5 Setting Color Temperature Manually The white balance can be manually adjusted by setting the color temperature. Manual color temperature settings can be performed for each of the WHITE BAL switch positions: PRST, A and B. To enable manual color temperature setting, the menu options AWB A and AWB B must be set to VAR. The color temperature is set using the menu options COLOR TEMP PRE, COLOR TEMP A, and COLOR TEMP B. These options can be found in the screen, which is accessible from the CAM OPERATION page. :+,7(%$/$1&(02'(! ),/7(5,1+21 6+2&./(66$:%1250$/ $:%$5 2))6(72)) &2/257(0335 0(0 &2/257(03 0(0 &2/257(03 7:63(('1250$/ 54