Panasonic AJSPX800P AJSPX800 User Guide - Page 68
Adjusting the Lens White Shading, <Note>, <Notes>
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Adjusting the Lens White Shading Take the following steps to adjust the white shading: Vertical coloring may occur near the open position of the lens iris, even after adjusting the white shading. This phenomenon, however, is a characteristic of the lens or optical system. It does not indicate a malfunction. 1 Mount the lens on the camera. Be sure to connect the lens cable. 2 Set the electronic shutter to [OFF], the gain to [L (0dB)], and the ASPECT option to "16:9". Select the ASPECT option from the SYSTEM MODE screen on the SYSTEM SETTING page. 3 If the lens has an extender, disable the extender feature. 4 Operate the MENU and go to the PAINT page to open the screen. Confirm that the GAMMA MODE SEL is set to STD. From the VF page, open the screen to confirm that ZEBRA1 DETECT, ZEBRA2 DETECT, and ZEBRA2 are set as shown in the diagram below. If they are not, correct the settings and then close the MENU screen. 8 Set the WHITE BAL selector switch to A or B, and execute Auto White Balance (AWB) with the AUTO W/B BAL switch. Next, execute Auto Black Balance (ABB) with the AUTO W/B BAL switch. Repeat Auto White Balance (ABB) with the AUTO W/B BAL switch. 9 Repeat the adjustment described in Step 7. 10 Activate the MENU and go to the MAINTENANCE page to open the screen. 11 Turn the JOG Dial button to move the cursor to DETECTION (V.SAW). Then, press the JOG Dial button to execute white shading compensation. :+,7(6+$',1*! &255(&721 '(7(&7,2196$: 9)',63/$