Panasonic AJSPX800P AJSPX800 User Guide - Page 88
Warning System
![]() |
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
7-3 Warning System 7-3-1 Warning Description Tables If a problem is detected immediately after the power is turned on, or during operation, this will be indicated by the WARNING lamp, lamps inside the viewfinder and a warning tone. The WARNING lamp has the highest priority, followed by the tally lamp, and then the warning tone. When multiple errors occur simultaneously a higher priority indication will be triggered. The [WIRELESS RF], however, may not be indicated, depending on the menu setting. 1. System Errors Display window indication The error code lights up. WARNING lamp Blinks 4 times per second. Tally lamp Viewfinder Warning tone Blinks 4 times per second. The SYSTEM ERROR indication and the error code light up. Beeps continuously. Warning description An error in the reference signal or the communication. Recording/ playback operation The operation stops. Countermeasures Please confirm [7-3-2 Error Codes] and consult your nearest service center. 3. Battery Empty Display window indication All 7 bar indicators for battery remaining capacity start blinking. WARNING lamp Lights up. Tally lamp Blinks once per second. Viewfinder The BATT LED lights up. Warning tone Beeps continuously. Warning description The battery has run out. Recording/ playback operation The operation stops. Countermeasures Replace the battery. 2. Card removal error Display window indication Error code E-30 appears. WARNING lamp Blinks 4 times per second. Tally lamp Blinks 4 times per second. Viewfinder The "TURN POWER OFF" indicator blinks. Warning tone Continues to beep. Warning description The P2 card being accessed has been removed, resulting in an error in the internal memory of the camera-recorder. Recording/ playback operation Cannot be performed. Turn off the power to the camera-recorder. If Countermeasures there is an error in a clip on the removed P2 card, repair the clip. 4. Write-protect Display window indication WARNING lamp Tally lamp Viewfinder Warning tone Warning description All 7 bar indicators for remaining MEDIA capacity start blinking. Continues to light up until an operation is performed. Continues to blink 4 times per second until an operation is performed. The WP indicator blinks. Continues to beep until an operation is performed. The inserted P2 cards are write-protected. Recording/ playback operation Recording is disabled. Countermeasures Disable the write-protect or replace the P2 card. 88
![](/manual_guide/products/panasonic-ajspx800-ajspx800-user-guide-9e7c54e/88.png)