Panasonic AJSPX800P AJSPX800 User Guide - Page 56
<Note>, To write set data on an SD card
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 To format the SD card, turn the JOG dial button to move the cursor to YES. Then, press the dial button. When the SD card has been formatted, the following message appears: To write set data on an SD card: 1 Navigate the menu to the screen. To select a file number: 2 Turn the JOG dial button to move the cursor to the option [W. SELECT]. Then, press the dial button. &21),*2. 6'&$5'5($':5,7(! 56(/(&7 5($' :6(/(&7 5,7( &$5'&21),* 7,7/(5($' The card will not be formatted if the following message appears when the JOG dial button is pressed: Error message CONFIG NG NO CARD (No SD card inserted.) CONFIG NG ERROR (SD card cannot be formatted.) CONFIG NG WRITE PROTECT (SD card is write-protected.) CONFIG NG CANNOT ACCCESS (SD card not accessible). Remedy Insert an SD card. The card may be defective. Replace the card. Remove the card and cancel the protect. Example: The SD card is not accessible because it is being played back. After the operation in process, format the card. 5 To exit the menu, press the MENU button. The settings menu disappears and the status of the AJSPX800P is indicated at the top and bottom of the viewfinder screen. If an SD card is inserted or removed with the screen open, the data title cannot be edited. Move the cursor to the option TITLE READ and press the JOG dial button. Edit the data title. 7,7 3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button. To give the selected file a title: 4 Turn the JOG dial button to move the cursor to the option [TITLE:]. 6'&$5'5($':5,7(! 56(/(&7 5($' :6(/(&7 5,7( &$5'&21),* 7,7/(5($' 7,7 5 Press the JOG dial button. This moves the cursor to the entry area, putting the AJ-SPX800P in entry mode. 6'&$5'5($':5,7(! 56(/(&7 5($' :6(/(&7 5,7( &$5'&21),* 7,7/(5($' 7,7 56