Panasonic WV-NF284 Network Camera - Page 21
Con the settings relating to images and audio [Camera setup]
![]() |
UPC - 791871505298
View all Panasonic WV-NF284 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Configure the settings relating to images and audio [Camera setup] The settings relating images and audio such as brightness and image quality of JPEG/MPEG-4 can configured on this page. The "Camera setup" page has 3 tabs of the [JPEG/MPEG-4] tab, the [Camera] tab and the [Audio] tab. Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4] Click the [JPEG/MPEG-4] tab on the "Camera setup" page. (☞ page 15) ■ JPEG setup Configure the settings such as "Refresh interval (JPEG)", "Image capture size" and "Image quality" on this page. Refer to page 22 for further information about the settings relating to MPEG-4 images. [Image capture size] Select "QVGA" or "VGA" for the image capture size of JPEG images. Default setting: VGA [Image quality] Select image quality of JPEG images from the following. 0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low Default setting: 5 Normal [Refresh interval (JPEG)*] Select an interval to refresh the displayed JPEG image from the following. 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/2 fps/3 fps/5 fps/ 6 fps */10 fps */15 fps */30 fps * Default setting: 5 fps Note: When "ON" is selected for "MPEG-4 transmission", the refresh intervals may be longer than the set value when the setting value with an asterisk (*) on the right is selected. 21
![](/manual_guide/products/panasonic-wvnf284-network-camera-a3895ff/21.png)