Panasonic WV-NF284 Network Camera - Page 23
Unicast port1 Image], Available value, Default setting, Multicast address], Multicast port], Important - ip camera
UPC - 791871505298
View all Panasonic WV-NF284 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
[Unicast port1 (Image)] Enter the unicast port number (used to transmit image from the camera). Available value: 1024 - 50000 (Only even numbers are available.) Default setting: 32004 [Unicast port2 (Audio)] Enter the unicast port number (used to transmit audio from the camera). Available value: 1024 - 50000 (Only even numbers are available.) Default setting: 33004 [Multicast address] Enter the multicast IP address. Images and audio will be transmitted to the designated IP address. Available value: 224.0.0.0 - 239.255.255.255 Default setting: 239.192.0.20 [Multicast port] Enter the multicast port number (used to transmit MPEG-4 images from the camera). Available value: 1024 - 50000 (Only even numbers are available.) Default setting: 37004 [Multicast TTL] Enter the multicast TTL value. Available value: 1 - 254 Default setting: 16 Important: • Depending on the PC in use for monitoring, the mul- ticast port number may be already in use. In this case, it may be impossible to monitor images. Change the multicast port number. • When transmitting MPEG-4 image via a network, the transmitted image sometimes may not be displayed. In this case, refer to the network administrator. • When two or more network interface cards are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying images using the multicast port. 23