Panasonic WV-NF284 Network Camera - Page 48

Initialize/restart the camera [Initialization] Click the [Initialization] tab of the "Maintenance" page. (☞ page 15) Initialization of the setup data and HTML files of the camera and restarting of the camera can be performed on this page. [Initialize setup data] Click the [Execute] button to reset the settings to the default. However, the network settings will not be reset. It is impossible to operate the camera for around 1 minute after the initialization. [Initialize HTML data] Click the [Execute] button to reset the HTML files to the default. It is impossible to operate the camera for around 1 minute after the initialization. [Initialize setup data and HTML data] Click the [Execute] button to reset the settings of the camera and the HTML files to the default. However, the network settings will not be reset. It is impossible to operate the camera for around 1 minute after the initialization. [Restart] Click the [Execute] button to restart the camera. The camera will be inoperable for around 1 minute after the restart just as when the power is turned on. Notes: • To initialize the network settings, turn off the power of the camera first. Then, turn on the power of the camera while holding down the [INITIAL SET] button of the camera. Wait around 5 seconds without releasing the [INITIAL SET] button. Wait around 30 seconds after releasing the button. The camera will restart and the settings including the network settings will be initialized. • When the notification function is on, notification will be provided to the registered addresses (mail address or IP address) when the SD memory card has failed to mount after the restart or when the inserted SD memory card is locked. (☞ pages 32 and 33) 48