Panasonic WV-NF284 Network Camera - Page 24
Con the camera settings such as image quality and brightness, etc. [Camera], Brightness]
UPC - 791871505298
View all Panasonic WV-NF284 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Configure the camera settings such as image quality and brightness, etc. [Camera] Click the [Camera] tab on the "Camera setup" page. (☞ page 15) The following are descriptions of how to configure the settings relating to images such as brightness, etc. Note: When using the camera under low-light intensity, the flicker-less function may not work effectively even when "ON" is selected. In this case, select an interval for "Refresh interval (JPEG)" (☞ page 21) from the following; 0.1 fps/0.2 fps/0.5 ftp/1 fps/2 fps/5 fps/10 fps [Brightness] 17 steps (-8 - 8) are available for brightness. The value "-8" is the darkest and "8" is the brightest. Default setting: 0 [White balance] Select the white balance adjustment method from the following. AUTO: Adjusts the white balance automatically. HOLD: Fixes to the white balance applied when the [SET] button is clicked. Default setting: AUTO [Aperture level] 9 steps (-4 - 4) are available for aperture level (sharpness). The value "-4" is the softest and "4" is the sharpest. Default setting: 0 [Sensitivity up] Select the sensitivity from the following. OFF: Does not use the sensitivity adjustment. x2: Adjusts the sensitivity up to x2 automatically. x4: Adjusts the sensitivity up to x4 automatically. x8: Adjusts the sensitivity up to x8 automatically. x16: Adjusts the sensitivity up to x16 automatically. Default setting: OFF Important: When the sensitivity is incremented, the refresh interval may be longer. [Backlight compensation (BLC)] Select "ON" or "OFF" to determine whether or not to compensate backlight. ON: Compensates backlight. (Suitable when the subject has backlight.) OFF: Does not compensate backlight. (Suitable when the subject has light in the front.) Default setting: OFF [Flicker-less mode] Select "ON" or "OFF" to determine whether or not to use the flicker-less mode. Normally, select "OFF". When using the camera under fluorescent lamps and flickers appear, select "ON". Default setting: ON 24