Pfaff performance 5.2 Manual - Page 11

Presser feet

Get Pfaff performance 5.2 PDF manuals and user guides View all Pfaff performance 5.2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Presser feet 0A - Standard presser foot for IDT™ system (attached on the machine upon delivery) This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0mm. 1A - Fancy stitch foot for IDT™ system This foot is used for decorative stitches. The groove on the underside of the foot is designed to flow smoothly over the stitches. 2A - Fancy stitch foot When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed to flow smoothly over the stitches. 3 - Blindhem foot for IDT™ system This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. 4 - Zipper foot for IDT™ system This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move needle position to right or left to sew closer to zipper teeth. 5A - Sensormatic buttonhole foot When connected to the machine, the buttonhole is sewn in the length that has been entered into the machine. 5M - Manual buttonhole foot This foot is used for sewing manual buttonholes. Use the markings on the foot to position the garment edge. The finger on the back of the foot holds cording for corded buttonhole. 6A - Embroidery/Sensormatic free-motion foot This foot is used for embroidery and free-motion sewing. This foot can also be used for darning. 1/4" quilting foot for IDT™ system This foot is perfect for piecing and patchwork, especially when used in conjunction with the straight stitch needle plate. The distance from the needle to the outer edge of the right toe is 1/4" (6mm). The distance from the needle to the inner edge of the right toe is 1/8" (3mm). 8 - Maxi-stitch foot This foot is used for side-motion stitches. Important: Make sure that the IDT™ system is disengaged when using presser foot 2A, 5A, 5M, 6A and 8. 1:11 Introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
1:11
Introduction
Presser feet
0A - Standard presser foot for
IDT
™
system
(attached on the machine upon delivery)
This foot is used mainly for straight stitching and zigzag stitching with a stitch length
longer than 1.0mm.
1A -
Fancy stitch foot for
IDT
™
system
This foot is used for decorative stitches. The groove on the underside of the foot is
designed to flow smoothly over the stitches.
2A -
Fancy stitch foot
When sewing decorative stitches or short zigzag stitches and other utility stitches with less
than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed
to flow smoothly over the stitches.
3 -
Blindhem foot for
IDT
™
system
This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide
on the foot is designed to ride along the fold of the hem edge.
4 - Zipper foot for
IDT
™
system
This foot can be snapped on either the right or the left of the needle, making it easy to sew
close to both sides of the zipper teeth. Move needle position to right or left to sew closer to
zipper teeth.
5A -
Sensormatic buttonhole foot
When connected to the machine, the buttonhole is sewn in the length that has been entered
into the machine.
5M - Manual buttonhole foot
This foot is used for sewing manual buttonholes. Use the markings on the foot to position
the garment edge. The finger on the back of the foot holds cording for corded buttonhole.
6A -
Embroidery/Sensormatic free-motion foot
This foot is used for embroidery and free-motion sewing. This foot can also be used for
darning.
1/4” quilting foot for
IDT
™
system
This foot is perfect for piecing and patchwork, especially when used in conjunction
with the straight stitch needle plate. The distance from the needle to the outer edge of
the right toe is 1/4” (6mm). The distance from the needle to the inner edge of the
right toe is 1/8” (3mm).
8 - Maxi-stitch foot
This foot is used for side-motion stitches.
Important: Make sure that the
IDT
™
system is disengaged when using presser foot 2A, 5A, 5M, 6A and 8.