Pfaff performance 5.2 Manual - Page 34

PFAFF Start/stop Immediate tie-off Presser foot up and extra lift toggle Stitch restart Speed control Presser foot down and pivot toggle Needle up/down Thread snips Reverse indicator Action indicator Reverse button Buttons and indicators Presser foot up and extra lift toggle Touch this button to raise the presser foot. Press the button once more and the presser foot will raise to extra lift position and the needle will raise to up position. Presser foot down and pivot toggle Touch this button to lower the presser foot completely. Press the button once more to raise the presser foot to pivot height. The presser foot is lowered automatically when you start to sew. Stitch restart When you have stopped sewing in the middle of a stitch, press stitch restart to return to the beginning of the stitch again without having to reset any special settings you have made. If pressing the stitch restart button while sewing, the stitch will be finished and the machine will then stop. Speed control This function enables you to easily reduce the sewing speed. Just touch the speed control button to reduce the speed. To return to normal speed, deselect the button. You can change the speed limit on your machine. Long touch the speed control button to open a pop-up. Set desired speed limit using the slider, then close the pop-up. The next time you touch the speed control button, the speed will be reduced to the limit you have chosen. The limit will be shown at the top left corner on the screen. You can sew without closing the pop-up. Immediate tie-off Press immediate tie-off while sewing and your machine sews a few tie-off stitches and stops automatically. By touching the tie-off button once more while the action indicator is lit, the function can be turned off. The tie-off function can be programmed, see page 4:10. Needle up/down Press this button to move the needle up or down. The setting of the needle stop position is changed at the same time. When needle down is activated, the indicator underneath the button is lit, the needle will stop in the down position and the presser foot will raise to pivot height. You can also tap the foot control to raise or lower the needle. 3:6 Machine settings & buttons