Pfaff performance 5.2 Manual - Page 41
Stitch length, Stitch density
View all Pfaff performance 5.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Stitch length Increase or decrease the stitch length using + and -. The number above the control shows stitch length in mm. If lengthening a zigzag stitch or a decorative stitch, the entire stitch will be longer. If lengthening a satin stitch where the density can be adjusted, the entire stitch will be longer but the density will remain the same. Stitch density The stitch density control adjusts the density (the closeness of the satin stitches that make up the entire stitch). The density does not affect the actual length of the entire stitch. Touch + to decrease the density. Touch - to increase the density. The number above the control shows the distance between satin stitches in mm. Note: This is often used with specialty threads and when a less dense satin stitch is desired. Balance When sewing on special fabrics or doing a special technique, the balance may need to be adjusted. If a stitch can be balanced, a long touch symbol will appear in the stitch controls. To ensure a good result, start with sewing a test sample on the fabric you will use. To activate forward/backward balance, long touch the stitch length/density control. To activate side to side balance, long touch the stitch width/positioning control. Use the + and - icons to adjust the balance of the stitch. Note: Buttonholes can also be balanced. - - Stitch length + Stitch density + Balance forward/backward Balance side to side Sewing mode 4:5