Pfaff performance 5.2 Manual - Page 57
Stacking stitches, Single ribbon stitches
View all Pfaff performance 5.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Stacking stitches Sew beautiful decorations in two colors using the stacking stitches. The stacking stitches consist of pairs of matching stitches that are designed to be sewn on top of each other. Sew the first stitch and then sew the second, overlapping the first. Be sure to use the same starting point for each. Single ribbon stitches Add dimensional elements to your decorative stitching with the beautiful single ribbon stitches in your machine. Narrow ribbons are woven into theses special stitches as you sew. 2-5mm (approx ribbons are recommended for this technique. For best results, use stabilizer, 1 appropriate for your fabric type and weight, under your fabric to support your stitching. 1. Choose a single ribbon stitch in category 6.4. Activate needle down. Sew the first 2 part of pattern, sew until the machine stops automatically with needle down. 2. When you start to sew the stitch, it is important that you place the ribbon in the front of the needle in the same angle as the first part of the stitch is sewn. See illustration 2. Continue sewing until the machine stops again. 3 3. Fold the ribbon over the stitching and pull it across the fabric so that it is directly in front of the needle again. Continue sewing until the machine stops. Fold the ribbon over again and position in front of the needle as before; continue stitching until the machine stops. Repeat this process until the desired length of stitching is achieved. 4:21 Sewing mode