Pfaff performance 5.2 Manual - Page 35

PFAFF Start/stop Immediate tie-off Presser foot up and extra lift toggle Stitch restart Speed control Presser foot down and pivot toggle Needle up/down Thread snips Reverse indicator Action indicator Reverse button Start/stop Press this button to start or stop the machine without using the foot control. Press the button once to start and press it again to stop. Thread snips Press to cut both needle and bobbin thread immediately. If pressing this button while sewing, the machine will complete the stitch and cut the threads before the needle moves to the start position of the next stitch. Your machine ties off the thread, cuts the needle and bobbin threads and raises the presser foot and the needle. The thread snips function can be programmed, see page 4:10. Note: Threads are cut automatically when buttonholes are sewn with the Sensormatic buttonhole foot. The presser foot will not raise after thread snips if automatic presser foot lift has been deactivated in the settings menu. Thread snips performed by the machine can be cancelled in the settings menu. Reverse button For permanent reverse, press the button once before starting to sew. The reverse indicator will be lit and the machine sews in reverse until you press the button again., to cancel. If you press the reverse button while sewing, the machine sews in reverse for as long as you keep the button pressed. The reverse indicator is lit when the reverse button is pressed. Reverse is also used when sewing manual buttonholes, darning stitches, programmed tie-off end and tapering stitches. Reverse indicator The reverse indicator will be lit when pressing the reverse button to sew in reverse. It is also lit while sewing permanent reverse. Action indicator The action indicator is lit to indicate that an action is to be done, for example performing tapering. The indicator stays lit until the action is done. 3:7 Machine settings & buttons