Pfaff performance 5.2 Manual - Page 45
Sensormatic free-motion
View all Pfaff performance 5.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Sensormatic free-motion Activate to set the machine in Sensormatic freemotion mode for, e.g. Embroidery/Sensormatic free-motion foot 6A. When sewing free-motion at low speed the presser foot will raise and lower with each stitch to hold the fabric on the needle plate while the stitch is being formed. At higher speed, the presser foot floats over the fabric while sewing. Skipped stitches can occur if your fabric moves up and down with the needle as you are stitching. Lowering the presser foot height will reduce the space between the presser foot and the fabric and eliminate the skipped stitches. To adjust the presser foot height in Sensormatic free-motion mode, long touch the check box and make adjustments in the pop-up. Note: Be careful not to reduce the presser foot height too much. The fabric must still move freely under the presser foot. Do not use a spring foot if Sensormatic free-motion is activated, since the needle might damage the presser foot. Presser foot height Sewing mode 4:9