Pfaff performance 5.2 Manual - Page 48

Sewing mode Patchwork program The patchwork program makes it possible for you to program an exact seam length that can be sewn repeatedly. This is very useful when quilting. To program a seam length, activate the patchwork program. Sew your desired seam length and press the reverse button. The action indicator on the machine will be lit until the last repetition of the stitch is finished. This will set the length of the seam. After you have programmed the patchwork sequence, the patchwork program icon is inactive. The single stitch program is now activated instead. Combining Tapering and Patchwork or Single stitch programs Combining Tapering and Patchwork or Single stitch programs makes it possible to repeat a tapered seam with the same length. Activate tapering by selecting any of the tapering icons then activate Patchwork by touching the icon. Follow the instructions for tapering on the previous page. When the reverse button is pressed the action indicator will be lit until the taper and last repetion of the stitch is finished. The stitch is now programmed and the single stitch program is activated. When you start to sew again the stitch will automatically be repeated with the same length. Between the + and - icons the number of repetitions in the program is shown. Use the + and - icons to adjust the length of the seam. Note: The tapering is included in the repetitions shown on the screen. Sequencing Touch this icon to open sequencing. In sequencing you can create and adjust a sequence of stitches and letters. Read about sequencing in chapter 5. Stitch Creator™ feature Touch this icon to open Stitch Creator™ feature. Stitch Creator™ feature allows you to create your own 9mm stitches or edit built-in stitches. Every single stitch point can be edited. Read about Stitch Creator™ feature in chapter 6. 4:12 Singel stitch program Patchwork program Stitch Creator™ feature Sequencing