Philips PXG30 User Manual - Page 12

Set Up

Get Philips PXG30 - ProScreen XGA LCD Projector PDF manuals and user guides
UPC - 037849938089
View all Philips PXG30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

5. Set Up Connecting AC Power cord This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with peripheral equipment before turning the projector on. (Refer to pages 15 ~ 16 for connection.) Connecting AC Power Cord CAUTION For safety, unplug AC power cord when the projector is not used. When this projector is connected to the outlet with AC power cord, it is in Stand-by Mode and consumes a little electric power. Connect AC power cord (supplied) to the projector. The AC outlet must be near the projector and easily accessible. Note: AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side For the U.S.A. and Canada Ground AC Outlet side For Continental Europe For the U.K. To the power cord Connector on your projector. To the AC Outlet. (120 V AC) To the AC Outlet. (200 - 240 V AC) To the AC Outlet. (200 - 240 V AC) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
12
Connecting AC Power Cord
5. Set Up
Note:
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
To the power cord
Connector on your pro-
jector.
Projector side
AC Outlet side
Ground
To the AC Outlet.
(120 V AC)
For Continental Europe
For the U.S.A. and Canada
This projector uses nominal input voltages of 100-120 V or 200-240 V
AC.
This projector automatically selects the correct input voltage.
It is designed to work with single-phase power systems having a
grounded neutral conductor.
To reduce risk of electrical shock, do
not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power supply being in use.
Connect the projector with peripheral equipment before turning the
projector on.
(Refer to pages 15 ~ 16 for connection.)
CAUTION
For safety, unplug AC power cord when the projector is not
used. When this projector is connected to the outlet with AC
power cord, it is in Stand-by Mode and consumes a little electric
power.
Connecting AC Power cord
Connect AC power cord (supplied) to the
projector. The AC outlet must be near the
projector and easily accessible.
For the U.K.
To the AC Outlet.
(200 - 240 V AC)
To the AC Outlet.
(200 - 240 V AC)