Philips PXG30 User Manual - Page 45
Indicators and Projector Condition
UPC - 037849938089
View all Philips PXG30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
13. Appendix Indicators and Projector Condition Indicators and Projector Condition Check the Indicators for projector condition. Indicators Lamp yellow Temperature Warning red Standby green Power red Projector Condition The projector is Off. (The AC power cord is unplugged.) ✽ The projector is ready to be turned on with Standby/On button on the top control or on button on the remote control. ✽ The projector is operating normally. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled ✽ down enough and the temperature returns to normal, the Standby Indicator lights on and the projector can be turned on. (The Temperature Warning Indicator keeps flashing.) Check and clean the Air Filter. The projector is cooled down enough and the temperature ✽ returns to normal. When turning on the projector, the Temperature Warning Indicator stops flashing. Check and clean the Air Filter. The projector is being cooled down. It cannot be turned on until ✽ the Standby Indicator lights on. ✽ The projector detects an abnormal condition and cannot be turned on. For details of this symptom, refer to page 39. ✽ The projector is in the Power management mode. • • • on • • • flashing • • • dim • • • off ✽ When the life of the projection lamp draws to an end, the Lamp Indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Make sure to reset the Lamp Replace Counter after its replacement. 45