Philips PXG30 User Manual - Page 42
Maintenance, LAMP HANDLING PRECAUTIONS
UPC - 037849938089
View all Philips PXG30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
12. Maintenance Lamp Replace Counter Reset Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the Lamp Indicator will light off. 1 Turn the projector on, press Menu button to display the On- Screen Menu. Press Cursor Left/Right button(s) to select Setting Menu icon (refer to page 36, 37). 2 Press the Cursor Down button to select Lamp counter reset and then press the OK button. The message "Lamp replace counter reset?" is displayed. Select [Yes] and then press the OK button. 3 Another confirmation dialog box appears and select [Yes] to reset Lamp Replace Counter. Lamp Replacement Total time of lamp use. Total time of projector use Select Lamp counter reset and press OK button. The message "Lamp replace counter reset?" is displayed. Note : Do not reset the Lamp Replace Counter when the Projection Lamp is not replaced. LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. - Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps. - If the projector indicates that the lamp should be replaced, i.e., if the LAMP INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP INDICATOR lighted may increase the risk of lamp explosion. - A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used. IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN. If a lamp explodes, disconnect the projector's AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass. 42