Pioneer AVH-P6800DVD Owner's Manual - Page 100
Digital Signal Processor - parts
UPC - 012562803548
View all Pioneer AVH-P6800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Section 20 Digital Signal Processor # Press SOURCE to turn the source on if this unit is turned off. 4 Select the position for the seat on which the microphone is placed. Refer to Using the position selector on page 89. # If no position is selected before you start auto TA and EQ, FRONT-L is selected automatically. 5 Press SOURCE and hold until the unit turns off. 6 Touch and hold EQ to enter the auto TA and EQ measurement mode. 7 Plug the microphone into the microphone input jack on the multi-channel processor. # To cancel auto TA and EQ part way through, touch BACK or ESC. 10 When auto TA and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Understanding auto TA and EQ error messages on page 119.) 11 Touch ESC to cancel the auto TA and EQ mode. 12 Store the microphone carefully in the glove compartment. Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. AUTO TA&EQ microphone For details concerning operation, refer to the multi-channel processor's operation manual. 8 Touch START to start the auto TA and EQ. 9 Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is outputted from the speakers, and auto TA and EQ begins. # When all speakers are connected, auto TA and EQ is completed in about nine minutes. # To stop auto TA and EQ, touch STOP. 100 En