Pioneer AVH-P6800DVD Owner's Manual - Page 89
Introduction of DSP, adjustments, Using the position selector, Digital Signal Processor
UPC - 012562803548
View all Pioneer AVH-P6800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Digital Signal Processor Section 20 Digital Signal Processor Introduction of DSP adjustments 1 You can use this unit to control multi-channel processor (e.g. DEQ-P8000), which is sold separately. ! Some functions may differ depending on the multi-channel processor connected to this unit. By carrying out the following settings/adjustments in the order shown, you can create a finely-tuned sound field effortlessly. 1 Setting the speaker setting 2 Using the position selector 3 Auto TA and EQ (auto-time alignment and autoequalizing) 4 Adjusting the time alignment 5 Adjusting the speaker output levels using a test tone 6 Selecting a cross-over frequency 7 Adjusting the speaker output levels 8 Adjusting 3-band parametric equalizer 1 DSP display Shows the DSP function names. 1 Touch AUDIO MENU to display MENU. MENU appears on the display. 2 Touch DSP to display the DSP function names. The DSP function names are displayed and operable ones are highlighted. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # When playing discs recorded with more than 96 kHz sampling frequency, you cannot use audio functions. Also, equalizer curve setting, POSITION, AUTO EQ and AUTO TA will be cancelled. # When playing discs recorded with more than 96 kHz sampling frequency, audio is outputted from front speakers only. # When selecting the FM tuner as the source, you cannot switch to SLA. # When playing other than the DVD disc, you cannot switch to D.R.C. # When neither FRONT-L nor FRONT-R is selected in POSITION, you cannot switch to TIME ALIGNMENT. # When both the center speaker and the rear speaker are set to OFF in the speaker setting, you cannot switch to DOLBY PRO LOGIC II. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Note If you do not operate the DSP function within about 30 seconds, the display is automatically returned to the source display. Using the position selector One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automatically adjust the speaker output levels and inserts a delay time to match the number and position of occupied seats. En 89