Pioneer AVH-P6800DVD Owner's Manual - Page 93
Adjusting the speaker, output levels, Digital Signal Processor - problems
![]() |
UPC - 012562803548
View all Pioneer AVH-P6800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Digital Signal Processor Section 20 Digital Signal Processor ! Set the front or rear speaker to LARGE if the speaker is capable of reproducing bass content, or if no subwoofer is installed. 1 Touch SPEAKER SETTING on the DSP function menu. 2 Touch c or d to select the speaker to be adjusted. Each time you touch a or b selects the speaker in the following order: FRONT (front speakers)-CENTER (center speaker)-REAR (rear speakers)- SUB WOOFER (subwoofer)-PHASE (subwoofer setting) # You can switch to PHASE only when the subwoofer has been set to ON. 3 Touch c or d to select the correct size for the selected speaker. Each time you touch c or d selects the size in the following order: Speaker FRONT CENTER REAR SUB WOOFER PHASE Setting SMALL-LARGE OFF-SMALL-LARGE OFF-SMALL-LARGE ON-OFF REVERSE-NORMAL Correcting the subwoofer's phase If trying to boost the bass output of the subwoofer doesn't do much or rather makes you feel that the bass gets more murky, this may indicate that the subwoofer's output and bass content you hear over other speakers cancel each other out. To remove this problem, try changing the phase setting for the subwoofer. 1 Touch SPEAKER SETTING on the DSP function menu. 2 Touch c or d to select SUB WOOFER. Each time you touch c or d selects the speaker in the following order: FRONT (front speakers)-CENTER (center speaker)-REAR (rear speakers)- SUB WOOFER (subwoofer)-PHASE (subwoofer setting) 3 Touch c to turn subwoofer output on. # To turn subwoofer output off, touch d. 4 Touch d to select PHASE and then touch c or d to select the phase of subwoofer output. Touch d to select NORMAL (normal phase). Touch c to select REVERSE (reverse phase). Note When playing a 2-channel mono source with Pro Logic turned on, there may be occasions when the following will occur: ! No audio is outputted if the center speaker setting is SMALL or LARGE and no center speaker is installed. ! Audio is heard only over the center speaker if installed and the center speaker setting is SMALL or LARGE. Adjusting the speaker output levels You can readjust the speaker output levels using a test tone while listening to music. 1 Touch SPEAKER LEVEL on the DSP function menu. 2 Touch c or d to select the speaker to be adjusted. Each time you touch c or d selects the speaker in the following order: En 93
![](/manual_guide/products/pioneer-avhp6800dvd-owners-manual-d999bd9/93.png)