Pioneer AVH-P6800DVD Owner's Manual - Page 119
Error messages, Understanding auto TA and EQ error messages, Additional Information
UPC - 012562803548
View all Pioneer AVH-P6800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Additional Information Appendix Additional Information Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message. Message ERROR-02 ERROR-05 ERROR-A0 DIFFERENT REGION DISC NON PLAYABLE DISC (NONPLAY) TEMPERATURE PROTECTION IN MOTION PROTECT TRACK SKIPPED Cause Action (See) Dirty disc Clean disc. Scratched disc Replace disc. The disc is loaded upside down Check that the disc is loaded correctly. Electrical or mechanical Press RESET. Electrical or mechanical Consult your dealer or your nearest authorized Pioneer Service Station. The disc does not have the same re- Replace the DVD video with one bearing the gion number as this unit correct region number. This type of disc cannot be played Replace the disc with one this unit can play. by this unit The temperature of this unit is out- Wait until the unit's temperature returns to side the normal operating range within normal operating limits. All the files on the inserted disc are Replace disc. secured by digital rights management (DRM) The inserted disc contains WMA files that are protected by digital rights management (DRM) Replace disc. Understanding auto TA and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again. Message Cause Action Error check MIC Microphone is not connected. Plug the supplied microphone securely into the jack. Error check front SP, Error check FL SP, Error check FR SP, Error check center SP, Error check RL SP, Error check RR SP, Error check subwoofer The microphone cannot pick up the measuring tone of a speaker. ! Confirm that the speakers are connected correctly. ! Correct the input level setting of the power amp connected to the speakers. ! Set the microphone correctly. En 119