Pioneer AVH-P6800DVD Owner's Manual - Page 97
Adjusting 3-band parametric, equalizer
UPC - 012562803548
View all Pioneer AVH-P6800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Digital Signal Processor Section 20 Digital Signal Processor Adjusting 3-band parametric equalizer For Custom1 and Custom2 equalizer curves, you can adjust the front, rear and center equalizer curves separately by selecting a center frequency, an equalizer level and a Q factor for each band. ! A separate Custom1 curve can be created for each source. ! A Custom2 curve can be created common to all sources. ! The center speaker largely determines the sound image and getting the balance right isn't easy. We recommend reproducing a 2ch. audio (a CD for example) and getting the balance right among the speakers except for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and adjusting the center speaker output to the balance you have already got among the other speakers. % Touch PARAMETRIC EQ on the DSP function menu. Note You can select a center frequency for each band. You can change the center frequency in 1/3-octave steps, but you cannot select frequencies that have intervals shorter than 1 octave among the center frequencies of the three bands. Speaker select 1 Touch c or d to select SP-SEL. Each time you touch c or d selects the item in the following order: SP-SEL (speakers)-BAND (bands)- FREQUENCY (center frequency)-LEVEL (equalizer level)-Q. FACTOR (Q factor) 2 Touch c or d to select the speaker to be adjusted. Touch c or d until the desired speaker appears in the display. REAR (rear speakers)-CENTER (center speaker)-FRONT (front speakers) # You cannot select speakers whose size is set at OFF. Band 1 Touch c or d to select BAND. Each time you touch c or d selects the item in the following order: SP-SEL (speakers)-BAND (bands)- FREQUENCY (center frequency)-LEVEL (equalizer level)-Q. FACTOR (Q factor) 2 Touch c or d to select the equalizer band to be adjusted. Each time you touch c or d selects equalizer bands in the following order: LOW (low)-MID (mid)-HIGH (high) Frequency 1 Touch c or d to select FREQUENCY. Each time you touch c or d selects the item in the following order: SP-SEL (speakers)-BAND (bands)- FREQUENCY (center frequency)-LEVEL (equalizer level)-Q. FACTOR (Q factor) 2 Touch c or d to select the center frequency of selected band. Touch c or d until the desired frequency appears in the display. 40Hz-50Hz-63Hz-80Hz-100Hz-125Hz -160Hz-200Hz-250Hz-315Hz-400Hz- 500Hz-630Hz-800Hz-1kHz-1.25kHz- 1.6kHz-2kHz-2.5kHz-3.15kHz-4kHz- 5kHz-6.3kHz-8kHz-10kHz-12.5kHz En 97