Pioneer AVH-P6800DVD Owner's Manual - Page 84
Introduction of audio, adjustments, Using balance adjustment, Audio Adjustments
![]() |
UPC - 012562803548
View all Pioneer AVH-P6800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Section 19 Audio Adjustments Introduction of audio adjustments # To return to the display of each source, touch ESC. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. 1 1 Audio display Shows the audio function names. Important If the multi-channel processor (DEQ-P8000) is connected to this unit, the audio function will be changed to the multi-channel processor's audio menu. For details, refer to Introduction of DSP adjustments on page 89. 1 Touch AUDIO MENU to display MENU. MENU appears on the display. # You can also display MENU by clicking the joystick on the remote control. 2 Touch AUDIO to display the audio function names. The audio function names are displayed and operable ones are highlighted. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # Only when the PREOUT setting in the initial menu is FULL, NON FADING will be displayed instead of SUB WOOFER. (Refer to Setting the rear output and subwoofer controller on page 107.) # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the previous display, touch BACK. Using balance adjustment You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats. 1 Touch FADER BALANCE on the audio function menu. # When the rear output setting is SUB. W, BALANCE will be displayed instead of FADER BALANCE. Refer to Setting the rear output and subwoofer controller on page 107. 2 Touch a or b to adjust front/rear speaker balance. Each time you touch a or b it moves the front/rear speaker balance towards the front or the rear. FRONT:15 to REAR:15 is displayed as the front/rear speaker balance moves from front to rear. # FR:00 is the proper setting when only two speakers are used. # When the rear output setting is SUB. W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 107. 3 Touch c or d to adjust left/right speaker balance. Each time you touch c or d it moves the left/ right speaker balance towards the left or the right. LEFT:09 to RIGHT:09 is displayed as the left/ right speaker balance moves from left to right. 84 En
![](/manual_guide/products/pioneer-avhp6800dvd-owners-manual-d999bd9/84.png)