Pioneer DEH-P800PRS Owner's Manual - Page 19
Selecting stations from the, preset channel list, Tuning in strong signals, Tuner - replacement
UPC - 012562883724
View all Pioneer DEH-P800PRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Tuner Section 04 English 2 Press MULTI-CONTROL to turn BSM on. Searching is displayed. While Searching is displayed, the six strongest broadcast frequencies will be stored under preset tuning numbers 1 to 6 in the order of their signal strength. When finished, the preset channel list appears. # To cancel the storage process, press MULTI-CONTROL again. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station. Press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically. Note Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6. Selecting stations from the preset channel list The preset channel list lets you see the list of preset stations and select one of them to receive. 1 Turn MULTI-CONTROL to switch to the preset channel list mode. # You can also perform this operation by pressing joystick on the remote control. 2 Use MULTI-CONTROL to select the desired station. Turn to change the station. Press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically. Notes ! You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display. ! You can also recall stations assigned to preset tuning numbers P01 to P06 by pressing one of the preset tuning buttons 1 to 6 on the remote control. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Use MULTI-CONTROL to select Local in the function menu. Local appears in the display. 2 Press MULTI-CONTROL to turn local seek tuning on. Local seek sensitivity (e.g., Level 2) appears in the display. # To turn local seek tuning off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL left or right to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: Level 1-Level 2-Level 3-Level 4 AM: Level 1-Level 2 The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. En 19