Pioneer DEH-P800PRS Owner's Manual - Page 56
Switching left and right, channel, Audio Adjustments
UPC - 012562883724
View all Pioneer DEH-P800PRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Section 13 Audio Adjustments F/B (balance adjustment)-POSI (position selector)-TA1 (time alignment setting)-TA2 (time alignment adjusting)-LOUD (loudness) -EQ 1 (graphic equalizer)-EQ 2 (16-band graphic equalizer)-SW 1 (subwoofer on/off) -SW 2 (subwoofer cut-off frequency)-SW 3 (subwoofer slope)-F.HPF 1 (front high pass filter slope)-F.HPF 2 (front high pass filter cut-off frequency)-R.HPF 1 (rear high pass filter slope)-R.HPF 2 (rear high pass filter cutoff frequency)-BBE (BBE)-BMX (BMX and compression)-A.EQ (auto-equalizer on/off)- SLA (source level adjustment) # You can also switch between the audio functions in reverse order by turning MULTI-CONTROL counterclockwise. # When tuner, television or AUX is selected as a source, you cannot select BMX. # When selecting FM as the source, you cannot switch to SLA. # When selecting TA OFF in TA1, you cannot switch to TA2. # You can select SW 2 and SW 3 only when subwoofer output output is turned on in SW 1. # To return to the display of each source, press BAND. Notes ! If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. ! EQ 2 (16-band graphic equalizer), TA2 (time alignment adjusting), NW 1 (network adjustment 1), NW 2 (network adjustment 2), NW 3 (network adjustment 3) and NW 4 (network adjustment 4) functions are not canceled automatically. Switching left and right channel You can adjust following functions for left and right channel independently or commonly. 3-way network mode ! Adjusting network (NW 1, NW 2, NW 3) ! Adjusting 16-band graphic equalizer (EQ 2) Standard mode ! Adjusting subwoofer settings (SW 2) ! Adjusting low pass filter attenuation slope (SW 3) ! Setting the high pass filter for front speakers (F.HPF 1, F.HPF 2) ! Setting the high pass filter for rear speakers (R.HPF 1, R.HPF 2) ! Adjusting 16-band graphic equalizer (EQ 2) 1 Use MULTI-CONTROL to select the audio function described above. 2 Press MULTI-CONTROL and hold to switch between left/right independent mode and left/right common mode. Each pressing and holding MULTI-CONTROL selects left/right independent mode and left/ right common mode. 3 Press MULTI-CONTROL to select left channel or right channel when left/right independent mode has been selected. Each pressing MULTI-CONTROL selects left channel and right channel. 4 Adjust these functions as desired. 56 En