Pioneer DEH-P800PRS Owner's Manual - Page 61
Using subwoofer output, Audio Adjustments
UPC - 012562883724
View all Pioneer DEH-P800PRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Audio Adjustments Section 13 English 5 Push MULTI-CONTROL up or down to adjust the level of the selected speaker unit (filter). Each time MULTI-CONTROL is pushed up or down, the level of the selected speaker unit (filter) increases or decreases. ±0dB to -24dB is displayed as the level is increased or decreased. +6dB to -24dB is displayed as the level is increased or decreased, only if you have selected Low LPF. 6 Turn MULTI-CONTROL to select NW 3. NW 3 appears in the display. 7 Push MULTI-CONTROL left or right to select the slope of the selected speaker unit (filter). Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order: Low LPF: -36- -30- -24- -18- -12 (dB/ oct.) Mid HPF: -24- -18- -12- -6-Pass (0) (dB/oct.) Mid LPF: -24- -18- -12- -6-Pass (0) (dB/oct.) HighHPF: -24- -18- -12- -6 (dB/oct.) 8 Push MULTI-CONTROL up or down to switch the phase of the selected speaker unit (filter). Push MULTI-CONTROL up selects normal phase and NOR appears in the display. Push MULTI-CONTROL down selects reverse phase and REV appears in the display. # You can adjust the parameters for other speaker units (filters) in the same way. 9 Turn MULTI-CONTROL to select NW 4. NW 4 appears in the display. 10 Push MULTI-CONTROL left or right to select stereo or monaural. Push MULTI-CONTROL left to select monaural and MONO appears in the display. Push MULTI-CONTROL right to select stereo and Stereo appears in the display. # You can operate this procedure only when Low LPF is selected. 11 Press BAND to cancel the network adjustment mode. Using subwoofer output Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. When a subwoofer is connected to this unit, turn the subwoofer output on. The subwoofer output phase can be switched between normal and reverse. 1 Use MULTI-CONTROL to select SW 1. SW 1 appears in the display. 2 Press MULTI-CONTROL to turn subwoofer output on. ON appears in the display. Subwoofer output is now on. # To turn subwoofer output off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL left or right to select stereo or monaural. Push MULTI-CONTROL left to select monaural and MONO appears in the display. Push MULTI-CONTROL right to select stereo and Stereo appears in the display. En 61