Pioneer DEH-P800PRS Owner's Manual - Page 43
Displaying the Radio ID, Selecting stations from the, preset channel list, XM tuner
UPC - 012562883724
View all Pioneer DEH-P800PRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
XM tuner Section 09 English 1 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display. 2 Press MULTI-CONTROL to select the desired channel select setting. Press MULTI-CONTROL repeatedly to switch between the following channel select settings: Channel number (channel number select setting)-Category (channel category select setting) # You can also select the XM channel select setting by pressing and holding CLOCK. Selecting a channel in the channel category 1 Select the channel select settings to Category. Refer to Switching the XM channel select mode on the previous page. 2 Push MULTI-CONTROL up or down to select the desired channel category. 3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category. % Push MULTI-CONTROL up or down to select RADIO ID from channel category. # If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other. Selecting stations from the preset channel list The preset channel list lets you see the list of preset stations and select one of them to receive. 1 Turn MULTI-CONTROL to switch to the preset channel list mode. # You can also perform this operation by pressing joystick on the remote control. 2 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically. Displaying the Radio ID Channel number select setting If you select CH 000, the ID code is displayed. % Push MULTI-CONTROL left or right to select CH 000. Notes ! You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display. ! You can also recall stations assigned to preset tuning numbers by pressing one of the preset tuning buttons 1 to 6 on the remote control. Channel category select setting RADIO ID is provided as a channel category for displaying the ID code. En 43