Pioneer DEH-P800PRS Owner's Manual - Page 63
Setting the high pass filter for, front speakers, rear speakers
UPC - 012562883724
View all Pioneer DEH-P800PRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Audio Adjustments Section 13 English 2 Push and hold MULTI-CONTROL down to mute the selected speaker unit (filter). MUTE is displayed. # To cancel the muting, push MULTI-CONTROL up. Setting the high pass filter for front speakers 1 Use MULTI-CONTROL to select F.HPF 1. F.HPF 1 appears in the display. 2 Push MULTI-CONTROL left or right to select slope. Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order: -12- -6-Pass (0) (dB/oct.) # If you set the slope to 0 dB/oct. (Pass), the audio signal bypasses the filter, so the filter does not have an effect. 3 Turn MULTI-CONTROL to select F.HPF 2. F.HPF 2 appears in the display. 4 Push MULTI-CONTROL left or right to select cut-off frequency. Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50-63-80-100-125-160-200 (Hz) Only frequencies higher than those in the selected range are output from the front speakers. 5 Push MULTI-CONTROL up or down to adjust the output level of the front speakers. Each time MULTI-CONTROL is pushed up or down, the level of the front speakers increases or decreases. ±0 to -24 is displayed as the level is increased or decreased. Setting the high pass filter for rear speakers 1 Use MULTI-CONTROL to select R.HPF 1. R.HPF 1 appears in the display. 2 Push MULTI-CONTROL left or right to select slope. Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order: -12- -6-Pass (0) (dB/oct.) # If you set the slope to 0 dB/oct. (Pass), the audio signal bypasses the filter, so the filter does not have an effect. 3 Turn MULTI-CONTROL to select R.HPF 2. R.HPF 2 appears in the display. 4 Push MULTI-CONTROL left or right to select cut-off frequency. Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50-63-80-100-125-160-200 (Hz) Only frequencies higher than those in the selected range are output from the rear speakers. 5 Push MULTI-CONTROL up or down to adjust the output level of the rear speakers. Each time MULTI-CONTROL is pushed up or down, the level of the rear speakers increases or decreases. ±0 to -24 is displayed as the level is increased or decreased. En 63