Pioneer PDP-5070HD Owner's Manual - Page 50

09 Tuner Setup Selecting digital closed captions Use the following procedure to select digital closed captions: Service 1 to 6. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Closed Captions". ( / then ENTER) 4 Select "Digital Settings". ( / then ENTER) 5 Select "Digital Service". ( / then ENTER) 6 Select the desired closed caption. ( / then ENTER) Closed Captions Digital Settings Digital Settings Digital Service Digital Service Service 1 Service 2 Service 3 Service 4 Service 5 xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx Home Menu Exit • The factory default is "Service 1". 7 Press HOME MENU to exit the menu. NOTE • The Primary Caption Service is usually offered for Service 1, and the Secondary Language Service is usually offered for Service 2 if these services are available. Selecting digital closed caption parameters Use the following procedure to change such parameters of digital closed captions as font size, font type, foreground and background colors. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Closed Captions". ( / then ENTER) 4 Select "Digital Settings". ( / then ENTER) 5 Select "Font Size", "Font", or any other item. ( / then ENTER) 6 Select the desired parameter. ( / then ENTER) Closed Captions Digital Settings Digital Settings Font Size Font Size Large Standard Small xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx Home Menu Exit 7 Repeat steps 5 and 6 as necessary. ( , / ) 8 Press HOME MENU to exit the menu. The following table shows the parameters selectable for each item. Item Font Size Font1 Font Color Font Opacity Background Color Background Opacity Selection Auto/ Large/ Standard/ Small Auto/ Font 1/ Font 2/ Font 3/ Font 4/ Font 5/ Font 6/ Font 7 Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/ Magenta/ Cyan Auto/ Solid/ Transparent/ Translucent/Flashing Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/ Magenta/ Cyan Auto/ Solid/ Transparent/ Translucent 1 Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with serifs)/ Font 3 (monospaced without serifs)/ Font 4 (proportionally spaced without serifs)/ Font 5 (casual font)/ Font 6 (cursive font)/ Font 7 (small capitals font) With "Auto" selected, parameters specified by the provider are used; if not specified by the provider, the bolded default parameters are used. If you select parameters other than "Auto", the selected parameters are used regardless of the provider's specifications. Clock Setting With "Auto Set" selected for Clock Setting, the system acquires and sets time information automatically. You can also manually set the correct time. If you disconnect the power cord from the power outlet or power blackout occurs, the set time is cleared. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Clock". ( / then ENTER) 4 Select "Time Zone". ( / then ENTER) 5 Select a time zone for your area. ( / then ENTER) Clock Time Zone Time Zone Atlantic Eastern Central Mountain Current Time: 9:55 pm EDT Monday 05/17/04 xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx Home Menu Exit 6 Select "D.S.T.". ( , / , then ENTER) 7 Select "Applies" or "Does Not Apply". ( / then ENTER) • Make this selection, depending on whether summer time is employed in your area. Clock Daylight Savings Time D.S.T. Applies Does Not Apply Current Time: 9:56 pm EDT Monday 05/17/04 xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx Home Menu Exit 8 Select "Auto/Manual Set". ( , / , then ENTER) 9 Select "Auto Set" or "Manual Set". ( / then ENTER) 50 En