Pioneer PDP-5070HD Owner's Manual - Page 80

12 Enjoying through External Equipment Starting a standard single-image screen When the thumbnail screen is displayed, press / and / to highlight a desired image, and then press ENTER. The thumbnail screen closes, and only the selected image is displayed. Home Gallery [PICTURE SIZE] 1600 1200 [SAVED DATE] 2005.08.29 [FILE NAME] 002 [ROTATION ANGLE] 0˚ A Previous B Next C Rotation 7 Select "Playback Mode". ( / ) 8 Select "Auto" or "Manual". ( / ) • With "Auto" selected, images are automatically changed at the specified intervals. • With "Manual" selected, the previous image is displayed by pressing BLUE or the next image by pressing RED. Home Gallery Slide Show Setup Display Mode Playback Order Number of Times of Playback Playback Mode Interval(sec) Nomal Name Order Single time Auto 3sec HOME MENU Exit With the above screen displayed, you can use the following keys to perform various operations: BLUE: Displays the previous image in the normal or full screen. RED: Displays the next image in the normal or full screen. GREEN: Rotates the displayed image clockwise. Each press rotates the image in the sequence; 90°, 180°, and then 270°. ENTER: Each press switches between the normal screen and the full screen. HOME MENU Exit 9 If you have selected "Auto" in step 8, press / to select "Interval(sec)", and then press / to select the desired display duration for individual images. • You can select from among 3 seconds, 5 seconds, 10 seconds, 20 seconds, 30 seconds, 60 seconds, and 90 seconds. 10 To start the Slide Show screen, press RETURN to display the thumbnail screen and then press BLUE. • To quit the Home Gallery function, press HOME MENU. NOTE • If you intend to display the Slide Show screen for an extend period of time, select "FULL" for the screen size in order to avoid image retention on the screen. HOME MENU: Quits the Home Gallery function. NOTE • Be careful not to display the same image for an extended period of time. The image may be burnt into the screen, resulting in a residual image. • Images smaller than 1024 × 768 pixels are displayed with blank surrounding. Starting the Slide Show Setup screen When the thumbnail screen is displayed, press RED to start the screen to set up the Slide Show that sequentially changes images. 1 Select "Display Mode". ( / ) 2 Select "Normal" or "Full". ( / ) • With "Full" selected, images are displayed using the full screen. 3 Select "Playback Order". ( / ) 4 Select "Name Order" or "Random". ( / ) 5 Select "Number of Times of Playback". ( / ) Starting the Slide Show screen After setting up the Slide Show, you can start it to sequentially change the images. 1 To start the Slide Show screen, press BLUE when a thumbnail screen is displayed. • With "Auto" selected for "Playback Mode", images are automatically changed at the specified intervals. • With "Manual" selected for "Playback Mode", press BLUE to display the previous image or RED to display the next image. • While images are automatically changed, you can stop and hold automatic image change for approximately 300 seconds by pressing BLUE. To resume, press and hold BLUE again. 2 When quitting the Slide Show screen, press RETURN to restore the thumbnail screen or HOME MENU to quit the Home Gallery function. 3 Select from normal screen or full screen by pressing ENTER. • Each press switches between the normal screen and the full screen. 6 Select "Single Time" or "Loop". ( / ) • With "Loop" selected, Slide Show is repeated until RETURN is pressed. 80 En