Pioneer PDP-5070HD Owner's Manual - Page 75

Enjoying through External Equipment 12 English Switching the optical audio signal type Set up for the DIGITAL AUDIO output terminal (OPTICAL), depending on your AV receiver. 1 Press HOME MENU. 2 Select "Option". ( / then ENTER) 3 Select "Digital Audio Out". ( / then ENTER) 4 Select "Dolby Digital" or "PCM". ( / then ENTER) Item Description Dolby Digital For Dolby Digital encoded signals, outputs in the (factory default) Dolby Digital format. For PCM encoded signals, outputs in the PCM format. PCM Always outputs in the PCM format regardless of the types of signals. 5 Press HOME MENU to exit the menu. Watching an image from a personal computer Connecting a personal computer Use the PC terminals to connect a personal computer. NOTE • The PC input terminals are DDC2B-compatible. • Plug & Play may not correctly function, depending on the personal computer in use. Plasma Display (rear view) Viewed from below of the Plasma Display AV cable with a mini plug (commercially available) (When PC audio is connected) RGB cable (commercially available) Displaying an image from a personal computer When connected to a personal computer, the input signal type is automatically identified. If the personal computer image does not come in clearly, you may need to use Auto Setup. See page 68. To watch an image coming from the personal computer, press PC on the remote control unit or press INPUT on the Plasma Display to select "PC". NOTE • The PC terminals cannot be used for audio-visual equipment. Signal names for 15-pin mini D-sub connector Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 543 21 10 9 8 7 6 15 14 13 12 11 (front view) Signal name R G B Not connected Not connected GND (ground) GND (ground) GND (ground) +5V GND (ground) Not connected SDA HD VD SCL NOTE • A Macintosh adaptor may be required for use with some Macintosh computers. Personal computer 75 En