Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 115

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the Sonos System for Playback By connecting this unit and a Sonos Connect, you can transfer music and sound sources on the Sonos App to this unit. By going through the Sonos Connect, you can play this unit through other Sonos devices in the network in the same group, or you can just play on this unit. Furthermore, by connecting this unit and the Sonos Connect to the same network, the power of this unit turns on automatically when music starts playing, and the linked function to switch input works. • If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is set to "Off " in the Home, manually turn the unit on and then press NET on the remote controller. In the factory default setting, the Network Standby function ( p169) is set to On. Necessary Equipment • Sonos Connect • RCA Audio Cable (Supplied with Sonos Connect) How to Connect This Unit and Sonos Connect 1. Connect the Sonos Connect to the AUDIO IN jack of this unit with the RCA audio cable supplied with the Sonos Connect. Any input can be used other than the PHONO input. • You can also connect with a digital cable. For details, refer to the instruction manual of the Sonos. • You can rename the input that is displayed on the unit to a more logical name. For example, you can change the name of input that the Sonos Connect is plugged into from "CD" (or other input) to "SONOS". Press the button on the remote controller to display the Home screen, and select "System Setup" - "Source" - "Name Edit" to change the name. Setting Up A setup is required to play Sonos on this unit. Make the setting according to the following procedure. 1. Press the button on the remote controller to display the Home screen, select "System Setup" - "Hardware" - "Works with SONOS", and press the ENTER button. 2. Select the following items with the cursors / and set each item. Input Selector: Enable the interlocking function with the Sonos Connect. With the cursors / , select the input selector to which the Sonos Connect is connected. Connected Device: Press the ENTER button to display Sonos devices connected to the same network as the network of this unit. Select the Sonos Connect connected to the unit and press the ENTER button. • Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Connect are also displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the input is switched, however, audio is not output. Select the room name of the connected Sonos Connect. • Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. Output Zone: With the cursors / , select the ZONE where you want to listen to the music. "Main": Outputs audio only to the main room (where this unit is located). "Zone 2": Outputs audio only to the separate room (ZONE 2). "Main/Zone 2": Outputs audio to both the main room and separate room. "Zone 3": Outputs audio only to the separate room (ZONE 3). "Main/Zone 3": Outputs audio to both the main room and separate room (ZONE 3). "Zone 2/Zone 3": Outputs audio to both the separate rooms (ZONE 2 and ZONE 3). 115 Front Panel≫ Rear Panel≫ Remote≫