Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 123
Playing Back (ZONE 2), with the volume button while pressing and holding the ZONE 2 button
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Playing Back (ZONE 2) Contents ≫ Connections ≫ Playback ≫ Setup ≫ In the remote controller operation, while pressing and holding the ZONE 2 button on the remote controller, operate with each button. 1. Point the remote controller at the unit, and while pressing and holding the ZONE 2 button on the remote controller, press . • "Z2" on the display of the main unit lights up. 2. While pressing and holding the ZONE 2 button on the remote controller, press the input selector of the input source you want to play in the separate room. When operating on the main unit, press the ZONE CONTROL button repeatedly to select "Z2" on the display, then within 8 seconds select the input you want to play in another room using the input selector dial. 3. If the unit is connected to the pre-main amplifier in the separate room, adjustthe volume on the pre-main amplifier. If the unit is connected to the power amplifier or ZONE speaker in the separate room, adjust the volume with the volume button while pressing and holding the ZONE 2 button on the remote controller. When operating on the main unit, press the ZONE CONTROL button repeatedly to select "Z2" on the display, then within 8 seconds adjust using the MASTER VOLUME knob. • When connecting the power amplifier, set "Multi Zone" - "Zone 2" - "Output Level" ( p174) to "Variable" on the System Setup menu. If it is not set, a large volume is output and the power amplifie, speakers, etc. may be damaged. • Information of a connected device can be displayed on the TV in the separate room. Press the button while pressing and holding the ZONE 2 button on the remote controller. • If you turn the unit to standby during multi-zone playback, the Z2 indicator is dimmed, and the playback mode is switched to playback in a separate room only. Setting ZONE 2 to on while the unit is in standby also switches the playback mode to playback in a separate room only. • The audio from externally connected AV components can be output to ZONE 2 only when the audio is analog or 2 ch PCM signal. When the AV component is connected to this unit with a HDMI cable, digital coaxial cable or digital optical 123 Front Panel≫ Rear Panel≫ Remote≫