Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 126
ZONE B Playback, Playing Back, OnA+B
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifie, etc. (ZONE B) ( p87) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1. Press the button on the remote controller to select "Audio" - "Zone B". • In the following cases, "Zone B" cannot be selected. -- When ZONE 2 is On -- When "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout" on the Home screen is set to "Zone 2"( p159) 2. Select an audio output destination. Off: Outputs audio only to ZONE A. "A" on the display of the main unit lights up. On(A+B): Outputs audio to both ZONE A and ZONE B. "A" and "B" on the display of the main unit light up. On(B): Outputs audio only to ZONE B. "B" on the display of the main unit lights up. 3. Start play on the AV component. 4. Adjust the sound volume on the pre-main amplifier, etc. of ZONE B. • When "Zone 2 Preout" is set to "Zone B" and "Audio" - "Zone B" at AV Adjust is set to "On (A+B)", the output of ZONE A is as shown below. -- The tone cannot be adjusted. -- "System Setup" - "Speaker" - "Crossover" - "Double Bass" ( p161) on the Home screen is fixed to "On". -- The effect of "System Setup" - "Speaker" - "Distance" ( p161) on the Home screen turns off. • If "On (A+B)" is selected as an audio output destination, you can select only the "Stereo" listening mode for ZONE A when using the 2.1ch speaker layout. When using a speaker layout of 3.1ch or more, you can select only the "Ext. Stereo" listening mode. 126 Front Panel≫ Rear Panel≫ Remote≫