Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 71

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„5.1.4 Channel System + ZONE SPEAKER MAIN ROOM     ZONE B (LINE OUT)       ZONE 2  MAIN ROOM:This is an example of combining the top middle speakers at the front and the rear high speakers at the rear to the 5.1 Channel System. The height speakers in front can be selected from following 4 types. The height speakers that can be combined at the rear differ depending on the height speakers used at the front.  Combination example when Top Front Speakers are used at the front ( p30)  Combination example when Top Middle Speakers are used at the front ( p32)  Combination example when Front High Speakers are used at the front ( p33)  Combination example when Dolby Enabled Speakers (Front) are used at the front ( p35) ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms.  "Speaker Setup" settings during Initial Setup ( p203) Speaker Setup Height 1 Speaker Height 2 Speaker Zone Speaker Speaker B Zone 2 Preout 5.1.4 ch 1 ch Top Middle Rear High Zone 2 Zone 2 • Speaker Channels: 5.1.4 ch • Subwoofer: 1ch • Height 1 Speaker: Select the type of height speaker actually installed. • Height 2 Speaker: Select the type of height speaker actually installed. • Zone Speaker: Zone 2 • Speaker B: No • Zone 2 Preout: Zone 2 • Bi-Amp: No • Symmetry / All Channel Adjust / Front Align ( p203) Setup To output the video and audio of the HDMI input to ZONE 2, from the Home screen, set "System Setup" - "Input/ Output Assign" - "TV Out/OSD" - "Zone 2 HDMI" ( p153) to "Use". 71 Front Panel≫ Rear Panel≫ Remote≫