Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 164

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„DTS/IMAX Change the setting of when DTS signals are input. Setting Item Dialog Control IMAX Mode IMAX User Setting IMAX Bass Feeding IMAX LFE Mute Level Default Value 0 dB Auto Auto On 0 dB Setting Details You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere. • This cannot be set for content other than DTS:X. • Depending on the content, this function may not be selected. Set the IMAX sound mode. "Auto": IMAX sound mode is automatically applied when IMAX content is detected. "On": In cases when this unit is unable to recognize IMAX content, you can apply the IMAX sound mode by turning this setting "On". "Off": Disable this function When playing IMAX content with the IMAX sound mode, select whether to automatically apply the speaker setting recommended by IMAX or to set it manually. "Auto": To use the speaker setup recommended by IMAX. "Manual": To manually set "IMAX Bass Feeding" and "IMAX LFE Mute Level". • This cannot be selected when the IMAX Mode is "Off". Set the route for the bass component of the audio. "On": The bass component of each channel is output according to the crossover settings ( p160) "Off": Only the LFE signal is output. • This cannot be selected when the "IMAX User Setting" is "Auto". You can set the volume for the LFE when IMAX signals are being input. Select "-∞ dB" or a value between "0 dB" and "-20 dB". • This cannot be selected when the "IMAX User Setting" is "Auto". „„LFE Mute Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. Setting Item LFE Mute Level Default Value 0 dB Setting Details Select the low-frequency effect (LFE) level of each type of signal from "0dB" to "-∞dB". If the lowfrequency effect sound is too strong, select "-20dB" or "-∞dB". • This function is disabled when the IMAX sound mode has been applied. „„Volume Change the Volume settings. Setting Item Mute Level Default Value -∞ dB Volume Limit Off Power On Level Last Headphone Level 0.0 dB Setting Details Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB". Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", "-32 dB" to "+17 dB". Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "-∞ dB", and "-81.5 dB" to "+18.0 dB". • You cannot set a higher value than that of "Volume Limit". Adjust the output level of headphones. Select a value between "-12.0 dB" and "+12.0 dB". 164 Front Panel≫ Rear Panel≫ Remote≫