Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 72

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„5.1.4 Channel System (Bi-Amping the Speakers)     ZONE B (LINE OUT)       For highfrequency For lowfrequency This is an example of combining the top middle speakers at the front and the rear high speakers at the rear to the 5.1 Channel System. The height speakers in front can be selected from following 4 types. The height speakers that can be combined at the rear differ depending on the height speakers used at the front.  Combination example when Top Front Speakers are used at the front ( p30)  Combination example when Top Middle Speakers are used at the front ( p32)  Combination example when Front High Speakers are used at the front ( p33)  Combination example when Dolby Enabled Speakers (Front) are used at the front ( p35) You can configure a 5.1.4 Channel System by connecting front speakers that support Bi-Amping connection. The BiAmping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well.  "Speaker Setup" settings during Initial Setup ( p203) Speaker Setup Height 1 Speaker Height 2 Speaker Zone Speaker Speaker B Zone 2 Preout 5.1.4 ch 1 ch Top Middle Rear High Zone 2 Front • Speaker Channels: 5.1.4 ch • Subwoofer: 1ch • Height 1 Speaker: Select the type of height speaker actually installed. • Height 2 Speaker: Select the type of height speaker actually installed. • Zone Speaker: No • Speaker B: No • Zone 2 Preout: Set any value ( p159) • Bi-Amp: Front • Symmetry / All Channel Adjust / Front Align ( p203) 72 Front Panel≫ Rear Panel≫ Remote≫