Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 149

Contents ≫ Connections ≫ Playback ≫ Setup ≫ System Setup Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( p151). Input/Output Assign Speaker Audio Adjust TV Out / OSD HDMI Input Video Input Digital Audio Input Analog Audio Input Input Skip PERSONAL PRESET Information Configuration Crossover Distance Channel Level Dolby Enabled Speaker Speaker Virtualizer Dual Mono/Mono Dolby DTS/IMAX LFE Mute Level Volume Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. Change input assignment between the input selectors and HDMI IN jacks. Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the VIDEO IN jacks. Change input assignment between the input selectors and DIGITAL AUDIO IN COAXIAL/OPTICAL jacks. Change input assignment between the input selectors and AUDIO IN jacks. You can skip inputs to which nothing is connected when selecting them with the INPUT SELECTOR dial on the main unit or with the input selectors on the remote controller. Confirm the registered contents of PERSONAL PRESET. Change the settings of connection environment of the speakers. Change the settings of crossover frequencies. Set the distance from each speaker to the listening position. Adjust the volume level of each speaker. Change the settings of Dolby Enabled Speakers. The Speaker Virtualizer function can be switched between On and Off. Change the settings of multiplex audio playback. Change the setting of when Dolby signals are input. Change the setting of when DTS signals are input. Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. Change the Volume settings. p152 p153 p154 p154 p155 p155 p156 p157 p160 p161 p162 p162 p163 p163 p163 p164 p164 p164 149 Front Panel≫ Rear Panel≫ Remote≫