Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 153

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item HDMI 4K Signal Fomat Zone 2 HDMI Default Value Standard Not Use Setting Details When an AV component such as a TV or player that supports HDMI 4K is connected to this unit, you can switch the 4K signal format that is input/ output by this unit. "Standard": When the AV component connected to this unit supports the standard 4K signal format (4K 60p 4:2:0 8bit). "Enhanced": When the AV component connected to this unit and the HDMI cable supports the highdefinition 4K signal formats (4K 60p 4:4:4, 4:2:2 and 4K 60p 4:2:0 10bit). Settings and the corresponding resolutions Enhanced Standard 4K (3840×2160p) 24/25/30 Hz 4KSMPTE(4096×2160p) RGB/ YCbCr4:4:4 8 bit 10/12 bit 24/25/30 Hz YCbCr4:2:2 12 bit 4K (3840×2160p) 50/60 Hz RGB/ YCbCr4:4:4 8 bit 4K SMPTE(4096×2160p) YCbCr4:2:2 12 bit 50/60 Hz 8 bit YCbCr4:2:0 10/12 bit • When setting to "Enhanced", use Premium High Speed HDMI Cable or Premium High Speed HDMI Cable with Ethernet that have the "PREMIUM Certified Cable" label attached to the packaging. • There may be some image disruption depending on the connected component and the HDMI cable. If this occurs, switch to "Standard". Make the setting when you output to the Zone 2 TV connected to the HDMI OUT ZONE 2 jack. "Use": Enable this function "Not Use": Disable this function • When video and audio via HDMI input are output to ZONE 2, set to "Use". Setting Item OSD Language Impose OSD Screen Saver Default Value English On 3 minutes Setting Details Select the on-screen display language from the following. (North American models) English, German, French, Spanish, Italian, Dutch, Swedish (European models) English, German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese Set whether or not to display information such as volume adjustment or switching of input on the TV screen. "On": OSD is displayed on the TV. "Off": OSD is not displayed on the TV. • OSD may not be displayed depending on the input signal even if "On" is selected. In this case, change the resolution of the connected device. Set the time to start the screen saver. Select a value from "3 minutes", "5 minutes", "10 minutes" and "Off". „„HDMI Input Change input assignment between the input selectors and HDMI IN jacks. Setting Item BD/DVD GAME Default Value HDMI 2 (HDCP 2.3) HDMI 1 (HDCP 2.3) Setting Details "HDMI 1 (HDCP 2.3)" to "HDMI 4 (HDCP 2.3)": Assign a desired HDMI IN jack to the BD/DVD input selector. If you do not assign a jack, select "---". To select an HDMI IN jack already assigned to another input selector, change its setting to "---" first. "HDMI 1 (HDCP 2.3)" to "HDMI 4 (HDCP 2.3)": Assign a desired HDMI IN jack to the GAME input selector. If you do not assign a jack, select "---". To select an HDMI IN jack already assigned to another input selector, change its setting to "---" first. 153 Front Panel≫ Rear Panel≫ Remote≫