Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 190

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„Advanced EQ Setup Reverberation characteristics are automatically calibrated according to the settings made. After making the following settings, place the speaker setup microphone in the listening position, and connect to the SETUP MIC jack on the main unit. Press ENTER and follow the on screen instructions. Setting Item Time Position EQ Type Standing Wave Multi Position Default Value 30 - 50 msec Symmetry No Setting Details Specify the calibrated time position in the range between "0 - 20 msec" and "60 - 80 msec" (10 msec intervals). If the reverberation characteristics differ for each frequency or each channel in the Reverb View graph, we recommend selecting "30 - 50 msec". If the overall reverberation characteristics are similar, we recommend selecting "60 - 80 msec". Select the calibration type. "Symmetry": Speakers that make one set as a left and right pair have their frequency characteristics calibrated flatly. Speakers not in pairs, such as the center speaker, are adjusted individually. Select when you want to give weight to phase characteristics for calibration. "All Channel Adjust": Flatly calibrates individually the frequency characteristics of all speakers. Select when you want to give weight to frequency characteristics for calibration. "Front Align": Calibrates speakers other than the front speakers so their characteristics match those of the front speakers (front speakers are not calibrated). Select when you want to give weight to characteristics of the front speakers for calibration. When you select "2" to "9", standing wave calibration can be performed at multiple listening positions along with the main listening position. If there is only one listening position, select "No". • If you select "2" to "9", calibration is first performed for the locations other than the main position, then the main position is calibrated last. „„Precision Distance With the distance of the front left speaker from the listening position as the standard, adjust the position of each speaker with a precision up to the closest 1 cm. Adjust the distance in order starting at the front right speaker. Test tone output alternates between the selected speaker and the speaker that is used as its benchmark. First setup the speaker setup microphone in the listening position and connect it to the SETUP MIC jack on the main unit, then select this setting. Setting Item Front Right Center Height 1 Left Height 1 Right Default Value - - - - Setting Details Move the speakers back and forth about a centimeter at a time in relation to the speaker setup microphone so that "Score" becomes "10.0". If the number does not become "10.0", put the speaker in the position where the maximum value is achieved. • Do not move the front left speaker, upon which calibration is based, during the adjustments. Move the speakers back and forth about a centimeter at a time in relation to the speaker setup microphone so that "Score" becomes "10.0". If the number does not become "10.0", put the speaker in the position where the maximum value is achieved. • Do not move the front left speaker, upon which calibration is based, during the adjustments. Move the speakers back and forth about a centimeter at a time in relation to the speaker setup microphone so that "Score" becomes "10.0". If the number does not become "10.0", put the speaker in the position where the maximum value is achieved. • Do not move the front left speaker, upon which calibration is based, during the adjustments. Move the speakers back and forth about a centimeter at a time in relation to the speaker setup microphone so that "Score" becomes "10.0". If the number does not become "10.0", put the speaker in the position where the maximum value is achieved. • Do not move the height 1 left speaker, upon which calibration is based, during the adjustments. 190 Front Panel≫ Rear Panel≫ Remote≫