Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 162

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„Channel Level Adjust the volume level of each speaker. If multiple settings are saved in the MCACC Memory, press on the remote controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC Memory". Setting Item Front Left Center Front Right Height 1 Left Height 1 Right Height 2 Left Height 2 Right Surround Right Surr Back Right Surr Back Left Default Value 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Setting Item Surround Left Subwoofer 1 Subwoofer 2 Default Value 0.0 dB 0.0 dB 0.0 dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-15.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-15.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. „„Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. Setting Item Default Value Dolby Enabled 6' 0"/1.80 m Speaker to Ceiling Reflex Optimizer Off Setting Details Set the distance between the Dolby Enabled Speaker and the ceiling. Select between " 0' 0" 1/2"/"0.01 m" and "15.0 ft/4.50 m" (1/2 / 0.01 m units). • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. "Off": When this function is not used "On": When this function is used • The function is not effective if the listening mode is Pure Direct. • This setting can be selected when "Configuration" - "Height 1 Speaker" / "Height 2 Speaker" is set to "Dolby Speaker". 162 Front Panel≫ Rear Panel≫ Remote≫