Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 161
Distance
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Double Bass Off This can be selected only when "Configuration" "Subwoofer" is set to "1ch" or "2ch" and "Front" is set to "Large". Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer. "On": Bass output will be boosted "Off": Bass output will not be boosted • The setting will not automatically be configured even if you performed Full Auto MCACC. • This setting is disabled when the IMAX sound mode has been applied. However, when the "IMAX User Setting" ( p164) is "Manual" (default value is Auto), it is enabled. Distance Set the distance from each speaker to the listening position. If multiple settings are saved in the MCACC Memory, press on the remote controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC Memory". Setting Item Front Left Center Front Right Height 1 Left Height 1 Right Height 2 Left Height 2 Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer 1 Subwoofer 2 Default Value 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m 10' 0"/3.00 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Default values vary depending on the regions. • Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01 m. 161 Front Panel≫ Rear Panel≫ Remote≫