Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 63

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„5.1.2 Channel System + ZONE SPEAKER (ZONE 2/ZONE 3) MAIN ROOM   ZONE B (LINE OUT)    ZONE 2  ZONE 3  MAIN ROOM: This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of height speaker. You can select only one set of height speakers from the following three types for connection.  Front High Speakers/Rear High Speakers Installation Example ( p22)  Ceiling Speakers Installation Example ( p23)  Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p24) ZONE 2/ZONE 3: You can enjoy 2-ch audio in the separate room (ZONE 2/ZONE 3) while performing 5.1-ch playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2/ZONE 3 simultaneously. Also, different sources can be played back in both rooms. To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Note that ZONE 3 output is not possible with the connection using a HDMI cable, digital coaxial cable, or digital optical cable.  "Speaker Setup" settings during Initial Setup ( p203) Speaker Setup Height 1 Speaker Height 2 Speaker Zone Speaker Speaker B Zone 2 Preout 5.1.2 ch 1 ch --- Front High Zone 2/Zone 3 Zone 2 • Speaker Channels: 5.1.2 ch • Subwoofer: 1ch • Height 1 Speaker: --• Height 2 Speaker: Select the type of height speaker actually installed. • Zone Speaker: Zone 2/Zone 3 • Speaker B: No • Zone 2 Preout: Zone 2 • Bi-Amp: No • Symmetry / All Channel Adjust / Front Align ( p203) Setup To output the video and audio of the HDMI input to ZONE 2, from the Home screen, set "System Setup" - "Input/ Output Assign" - "TV Out/OSD" - "Zone 2 HDMI" ( p153) to "Use". 63 Front Panel≫ Rear Panel≫ Remote≫