Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 131

Using the AV Direct mode Contents ≫ Connections ≫ Playback ≫ Setup ≫ AV Direct can improve sound quality by limiting the activity of digital circuits and thereby suppressing the noise that is generated by them. You can choose from "AV Direct" which temporarily stops communications such as via the network, Bluetooth, and USB, and "AV Direct Net Off" which turns off the power for some digital circuits. Either one can be used to play the audio from external devices connected to the input terminals on this unit. • This function is not available with a source to which a Sonos Connect ( p115) is connected. Using "AV Direct" 1. Press the "AV DIRECT" button on the remote controller to turn "AV Direct" "On". To turn "Off", press the "AV DIRECT" button again. • "AV Direct" automatically switches off when you perform any of the following operations: -- Set this unit to standby. -- Switch the input source to "NET", "BLUETOOTH", "USB", or "TUNER". -- Select a source to which a Sonos Connect ( p115) is connected. -- Display the Setup menu. -- Switch the multi-zone function on. • Depending on the functions used, the track name may be displayed on the display and "Off" for "AV Direct" may not be displayed. Using "AV Direct Net Off" 1. While pressing and holding ZONE CONTROL on the main unit, press STATUS so that "AV Direct Net Off" appears on the display of the main unit. The power of some of the digital circuits are turned "Off". • "AV Direct Net Off" is automatically canceled when you perform any of the following operations: -- Set this unit to standby. -- Switch the input source to "NET", "BLUETOOTH", "USB", or "TUNER". -- Select a source to which a Sonos Connect ( p115) is connected. -- Display the Setup menu. -- Switch the multi-zone function on. 131 Front Panel≫ Rear Panel≫ Remote≫