Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 79

To Non-ARC TV HDMI OUT 4K HDR ARC eARC 5 V 500 mA USB a b Contents ≫ Connections ≫ Playback ≫ Setup ≫ If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV's built-in tuner), connection with a digital optical cable or analog audio cable is not required. • Another TV or projector can be connected to the HDMI OUT SUB jack. Switch between MAIN and SUB using the HDMI MAIN/SUB button ( p15) on the remote controller or "AV Adjust" ( p198). Note that this jack is not ARCcompatible. • If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution. • If a 4K high-quality video is played, use a Premium High Speed HDMI Cable or Premium High Speed HDMI Cable with Ethernet whose package has a "PREMIUM Certified Cable" label. Furthermore, in Home, displayed by pressing on the remote controller, set "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "HDMI 4K Signal Format" ( p153) to "Enhanced". (*) ARC function: This function transmits the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit. Connection to an ARCcompatible TV is complete with one HDMI cable. To check if the TV supports the ARC function, refer to the instruction manual of the TV, etc. a HDMI cable, b Digital optical cable TV 79 Front Panel≫ Rear Panel≫ Remote≫